Technology Consulting Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Engineering Field | Technical Consulting Services

Visualization and verification of various state variables! We propose problem-solving through a comprehensive approach that is not limited to any specific field!

Our company provides "Technical Consulting Services" aimed at solving all customer challenges related to manufacturing, production technology, equipment, and product development, based on various engineering and computational techniques. We support the understanding of phenomena in manufacturing environments, such as forces, vibrations, flows, and heat, by simulating them using fundamental equations of physics and engineering. This allows us to visualize physical quantities such as stress, streamlines, and heat flux, which cannot be seen with the naked eye. We offer comprehensive proposals and support for problem-solving through a multifaceted approach. 【Service Flow】 ■ Problem/Challenge Hearing: Hearing about the background and situation, confirming on-site and physical conditions, etc. ■ Proposal of Approach: Formulating hypotheses about the causes of problems based on hearing results. ■ Examination (CAE, Measurement, etc.): Simulation, analysis, and organization of measurement and experimental results. ■ Report Preparation/Reporting: Discussion of phenomena and problem causes, and proposals for solutions. *For more details, please refer to the PDF materials or feel free to contact us.

Company：宇部情報システム
Price：Other

Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing DX Solution 'LIVLOTS'

Digitally consolidate information from various sites such as offices and factories! Visualization and sharing of manufacturing progress are possible.

"LIVLOTS" is a system that enables efficient production by accommodating various types and variations. It connects your office, programming room, and manufacturing site to aggregate the necessary information for production (worker, product information, job details). It navigates the priority tasks for the site and each processing machine. Additionally, it can accumulate manufacturing results based on actual machine operation, leading to timely traceability and accurate cost calculation. 【Functions (partial)】 <JOB: Job Management> ■ Breaks down and instructs the manufacturing arrangement information input from the production management system into work details for each process, managing the progress of each process. <DOCUMENT: Drawing Management> ■ Centralizes the management of drawings, photos, etc., to share internal know-how. *For more details, please refer to the related links or feel free to contact us.

Company：アマダ（アマダグループ）
Price：Other

Other production management systems
Process Control System
Other information systems
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nozzle Technology Consulting

Consultation on technical issues related to nozzles.

NNC leverages its 40 years of experience in nozzle technology to provide unparalleled nozzle technology consulting services in the global nozzle market.

Company：ノズルネットワーク
Price：Other

nozzle
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spinning nozzle for synthetic fibers "Carbon fiber (wet nozzle)"

Carbon fibers are classified into PAN-based and pitch-based according to the raw materials.

The wet spinning nozzle for synthetic fibers is classified into PAN (polyacrylonitrile) type and pitch (such as coal tar) type based on the raw materials. About 90% of the carbon fiber market is PAN type. PAN-based carbon fibers are obtained by carbonizing PAN precursors (polyacrylonitrile fibers) and possess high strength and high modulus properties. The wet spinning method involves fiber formation from the spinning dope in a coagulation liquid, allowing for a higher number of holes per unit area of the nozzle compared to dry and wet spinning methods. For more details, please download the catalog.

Company：日本ノズル
Price：Other

nozzle
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Synthetic fiber spinning nozzle "Dry nozzle"

It is a method of forming fiber filaments by evaporating the solvent and winding it up.

The "dry nozzle" for synthetic fiber spinning is a method that involves dissolving a polymer (high molecular material) in a solvent to create a polymer solution, which is then extruded through a porous nozzle. This solution is dried with hot air, causing the solvent to evaporate and forming fiber filaments. It is used for materials such as acetate, spandex, and acrylic. The dry spinning nozzle requires a higher level of precision compared to other nozzles. In the case of round hole nozzles, the diameter and length of the holes are important. For shaped hole nozzles, the edge width, edge length, and configuration angle, as well as the angle and cross-sectional shape of the inlet hole, are crucial. Additionally, the share of acetate is the highest in the world. For more details, please download the catalog.

Company：日本ノズル
Price：Other

nozzle
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Melt nozzle for synthetic fiber spinning

It is used to make fibers from thermoplastic polymers (polymeric materials).

The "melt nozzle" for synthetic fiber spinning is used when converting thermoplastic polymers (polymeric materials) into fibers. The polymer, which has become highly fluid due to high heat, is extruded under pressure through small holes, and while being pulled, it is cooled to form yarn. Compared to other spinning methods, the spinning speed is fast and productivity is high. It is used for spinning materials such as polyester and nylon. By changing the shape of the nozzle holes, fibers with various cross-sections can be produced. For more details, please download the catalog.

Company：日本ノズル
Price：Other

nozzle
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-woven fabric nozzle / Non-woven fabric device "Spunlace"

Non-woven fabric is produced by injecting high-pressure water flow to entangle the constituent fibers.

The non-woven fabric nozzle and non-woven fabric device "Spunlace" is a method for producing non-woven fabric by injecting high-pressure water flow into a fiber web to entangle the constituent fibers. By appropriately selecting the pressure and frequency of the high-pressure water flow ejected from the nozzle during the entanglement process, as well as the composition of the raw materials of the fiber web, a wide variety of patterns can be imparted to the non-woven fabric. For more details, please download the catalog.

Company：日本ノズル
Price：Other

nozzle
Other machine elements
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-woven fabric nozzle and non-woven fabric device "Meltblown Spunbond"

The meltblown method is a process for producing non-woven fabric from raw resin in a single step.

The non-woven fabric nozzle and non-woven fabric device "Meltblown Spunbond" is a method for producing non-woven fabric in a single step from raw resin. Melted thermoplastic plastic resin is extruded from a die installed after the extruder and blown onto a net conveyor or collection screen with a high-speed, high-temperature airflow, creating a self-adhesive web. On the other hand, spunbond involves heating and melting low melting point resin chips, such as polypropylene, and directly spinning them by extruding through a nozzle. The endless long fibers that are extruded are layered on top of each other on a belt conveyor to form a web. For more details, please download the catalog.

Company：日本ノズル
Price：Other

nozzle
Other machine elements
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Preparation Engineering [Coating] / Production Technology for Production Lines

Responsible for engineering that integrates equipment, devices, and paint specialty manufacturers.

Nihon Highcom will advance engineering activities together with our customers to achieve their objectives. We aim to support various missions in production preparation by proposing new systems and improvements based on "technology," "knowledge," and "experience," with the goal of realizing high-quality, high-value-added production systems. We provide comprehensive engineering tailored to our customers' required quality across each process, including production technology support, SE (Simultaneous Engineering), stamping, welding, painting, assembly, and inspection, through planning, detailed examination, and various simulations. 【Service Introduction: "Painting"】 ○ Responsible for engineering that integrates equipment, devices, and paint specialty manufacturers → Participating in SE engineering from the development concept stage in the painting process → Considering from various perspectives based on experience and achievements → Aiming for prototype to mass production, ensuring, maintaining, and improving quality → Initiatives that are environmentally friendly, such as environmentally responsive technology and energy-saving technology For more details, please contact us.

Company：日本ハイコム
Price：Other

Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Technology Consulting "Productivity Improvement Consulting"

We will propose improvements based on the three realities principle to enhance productivity and meet customer needs!

The consultants at Nihon Highcom are engaged in daily productivity improvement consulting for automotive manufacturers, parts manufacturers, and other manufacturing companies around the world. Utilizing the know-how cultivated in the production sites of automotive manufacturers, we thoroughly pursue and analyze "the current situation (reality) of the customer and the desired state of improvement" at production lines and production equipment sites, providing efficient and effective productivity improvement proposals. For more details, please refer to the catalog or feel free to contact us.

Company：日本ハイコム
Price：Other

Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Technology Consulting: Reasons Why Nihon Highcom is Chosen

Pursuing dramatic development and profits! Practical and comprehensive production technology consulting and engineering!

Nihon Haikom is a professional group specializing in production technology, utilizing high technical skills based on experience in vehicle production to provide high-quality engineering to customers around the world. In order to overcome new challenges such as intensified competition with overseas markets and the globalization of the economy, we obtained ISO 9001 in 2001 and are committed to activities that bring development and profit to our customers, with all employees working together as one. 【Strengths of Nihon Haikom】 ■ Achieving balanced management ■ Closely networking "soft" and "hard" aspects for flexible responses ■ Experts in production technology ■ Capable of handling all areas of automobile production For more details, please refer to our catalog or feel free to contact us.

Company：日本ハイコム
Price：Other

others
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Technology Consulting "Logistics Improvement Consulting"

We provide the know-how cultivated in Malaysia, where global logistics providers (TPL) gather!

Japan High Comm established a local subsidiary (Japan High Comm Malaysia Sdn Bhd) in Malaysia on January 15, 2013, and is engaged in logistics improvement activities. We plan and execute dedicated ideal logistics improvements, efficiency enhancements, and cost reductions, while forming projects with your staff and providing on-the-job training (OJT) for field guidance. 【Features】 - Provision of know-how cultivated in Malaysia, where global logistics providers (TPL) gather - Construction of a comprehensive logistics system (TSC) and provision of spiral logistics improvements - Introduction of the basic concepts of Lean Production System (LPS) into logistics improvements - Provision of cost reductions in logistics and a smooth logistics system while considering environmental conservation - Provision of comprehensive logistics services including customs operations for local production (SKD, CKD, import/export items) For more details, please refer to the catalog or feel free to contact us.

Company：日本ハイコム
Price：Other

Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Trust Technology Consulting Services

Introducing our technical consulting services, your ideal partner for product development!

Trust Technology's technical consulting services provide comprehensive support for product development from a technical perspective to customers who wish to build their own hardware and software products, along with accompanying services. Our goal is to develop better products and services as your partner, aiming to create products and services that will delight end users. As an independent research and development company, we fully support client companies in making appropriate decisions regarding their products and services without hesitation, drawing from a vast field of technology while maintaining a neutral stance. Please feel free to consult us when needed. 【Service Contents (Partial)】 ■ Meetings through customer visits ■ Consultations at any time via email and phone ■ Support and consultation on planning ■ Idea generation ■ Technical backing and analysis of the above *For more details, please refer to the PDF document or feel free to contact us.

Company：トラスト・テクノロジー
Price：Other

Other contract services
Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inkjet technology consulting

Inkjet technology / Printed electronics technology consulting ◎ Please feel free to consult with us. We can provide various know-how.

● Our company is capable of controlling inkjet heads from various manufacturers, including Konica Minolta, Fujifilm Dimatix, Ricoh, Kyocera, and others. ● We offer comprehensive consulting services related to inkjet devices for paper media printing, including inkjet devices, inkjet heads, ink materials, and printing control. ● We want to enter the printed electronics field, but we are unclear about the market, the demand for metal-based inks, what leading companies are doing, what applications and products exist, what materials are important, and how to build high-precision coating machines. ● Ink discharge evaluation (paid service). ● Equipment owned by our company: - Inkjet heads from various manufacturers - Control systems for inkjet heads from various manufacturers - Ultrasonic viscometer - Microcurrent/voltage/resistance meter - Stirring/mixing equipment - High-temperature bath - Spin coater - UV exposure/washing light source - Electronic balance - UV LED light source - Ultraviolet intensity meter - Camera microscope - Ultrasonic cleaner - High-resolution ink jetting observation - Inkjet printer - Other equipment - Prober for electrical characteristic measurement - Simple clean booth

Company：ワイ・ドライブ
Price：Other

Management consultant/Small business consultant
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ATE service

We provide consulting services for engineers and designers in the field of contract conclusion.

The manufacturing industry is delivering amazing products to the world every day. Bossard's ATE (Assembly Technology Expert) service helps accelerate time-to-market and enhance your competitiveness by finding the optimal fastening solutions for each product. Engineers and designers are surrounded by challenges such as technological innovation, process optimization, and efficiency improvements that are crucial for enhancing competitiveness in the manufacturing sector. The ATE service provides smart solutions for all fastening-related challenges from the development stage of new products. Furthermore, as a company certified with ISO 9001 and ISO 14001, we prioritize quality and safety while considering the environment. The education experts of the ATE service hold seminars to help more customers increase their technical knowledge and use our services correctly. We strive to be the best partner that our customers can trust, not just a mere supplier.

Company：ボサード
Price：Other

fastener
Technology Consulting

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study Analysis: "Scuttle Shake Analysis of Open Cars by OMA"

Scuttle shake analysis of open cars using OMA (Operational Modal Analysis).

We would like to introduce a case study by F-MA Consulting, a specialist in vibration noise analysis technology, titled "Scuttle Shake Analysis of Open Cars Using OMA (Operational Modal Analysis)." The definition of scuttle shake is: "a phenomenon commonly seen in open cars with low body rigidity," "which manifests as a 'shaking sensation' when driving in urban areas at speeds of 40 to 60 km/h," and "is generally said to be caused by low-frequency (10 to 20 Hz) twisting modes of the body." 【Experimental Analysis Using ModalVIEW】 - Collection of acceleration and deceleration data from actual vehicle runs at each measurement point - Pole extraction using SSI from time history data - Calculation of mode shapes at each point from the extracted modes - Display of vibration modes in the operational state For more details, please contact us or download the catalog.

Company：F-MAコンサルティング
Price：Other

Other analyses
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tsujiseiyu Co., Ltd. Research and Development / Quality Control Business Introduction

Not doing it is imitating others. Doing it is something that no one can do, something that one does not try to do.

The business primarily focuses on the research and development of natural materials, mainly constructing quality management systems and circular systems. Based on a customer-first principle, we establish quality management systems. Furthermore, while collaborating with the local community, we contribute to the realization of a circular society. At our company, we operate under the idea that "it is worth trying precisely because no one else is doing it," and we constantly seek something new while avoiding compromise. 【Business Activities】 ■ Construction of quality management systems ■ Construction of circular systems, etc. *For more details, please refer to our catalog or feel free to contact us.

Company：辻製油松阪工場
Price：Other

Other quality control systems
Other environmental measures and recycling
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Practical Knowledge Provision Service: EurekaBox

We provide the "knowledge" accumulated by technical consultants as a suitable "solution" for improving quality and development efficiency in development.

The solution provided by Exmotion = Academia (methodology of academic societies) × Business (practical know-how in development sites) "Eureka Box" is a comprehensive learning and practical platform that offers knowledge accumulated and practiced in the field of consulting, providing suitable solutions for improving quality and development efficiency in development. It handles "learning content," as well as "exercise content," "tool content," and "reference content," allowing users to acquire learning and practical methods based on actual field implementation. **Features** - "Online Consulting" Support: You can directly consult with consultants active in the field about the content via chat. - Content Group Tailored to Practice: It includes a wealth of case studies, FAQs, and tips practiced in consulting. - Four Selectable Courses: Offered in four courses based on the target fields, including introductory/practical and single field/entire field options. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：エクスモーション本社
Price：Less than 10,000 yen

Software (middle, driver, security, etc.)
Development support tools (ICE, emulators, debuggers, etc.)
Other embedded systems (software and hardware)
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical consulting services

For matters related to solar cells and process technology, please contact our company.

We provide technical consulting services. For companies considering entering the solar cell industry, we offer technical information related to solar cells and propose potential areas for entry and development challenges. Additionally, we provide technical consulting on vacuum processes and plasma processes, as well as proposals for process technology and contract development associated with the launch of new processes. Please feel free to contact us if you have any inquiries. 【Products and Services】 ■ Solar Cells ■ Process Technology *For more details, please download the PDF or feel free to contact us.

Company：アステラテック
Price：Other

Other services
Fuel Cells
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No-code, model-based production simulator

We achieve "overall optimization" of the production site through simulation!

Production simulation is generally said to require program development. Additionally, since individual application development is necessary for each project, it is often high-priced and can only be used for large-scale projects. The 'GD.findi' that we are introducing this time allows for simulation to be conducted without code, thanks to its unique data model technology. Since it does not require special development, it enables low-cost and speedy implementation. *For more details, please feel free to contact us.

Company：システムズナカシマ岡山支店
Price：Other

simulator
Other production management systems
Technology Consulting

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Customer Development Support Service

For those struggling with product development! We provide support with evaluation techniques such as spin tests and balancing.

We would like to introduce the "Customer Development Support Service" provided by Nagahama Manufacturing Co., Ltd. Using our evaluation technology for spin testing, balancing, and rotating machinery vibration, we offer proposals, experiments, and shape measurements for the spin testing of your newly developed products. Additionally, we analyze the product shape to ensure that it reaches the target rotational speed and provide design and manufacturing of attachments to achieve that goal. 【Service Contents】 ■ Overspeed ■ Burst ■ Low Cycle Fatigue Effects ■ Technical Consulting ■ Balancing *For more details, please download the PDF or feel free to contact us.

Company：長浜製作所
Price：Other

Other Testing Contract
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing Solution "Assembly Navigation System"

It is an assembly work support system to prevent the creation and occurrence of defects.

The "Assembly Navigation System" is an assembly work support system that can automatically import user-created work instructions (Excel) and display the work instructions linked to the work instructions on the screen. Work times and results are automatically registered in the database for each work item, allowing for the collected performance data to be referenced and analyzed on the management screen. 【Features】 ■ If there is a procedural error or if the result is outside the standard value, the worker will be notified, and they will not be able to continue the work. *For more details, please download the PDF or feel free to contact us.

Company：F&Lソリューション本社
Price：Other

Embedded system design service
Embedded Board Computers
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Specialized technical consulting services for PCB, semiconductor assembly, and materials.

As experts in technology and strategy, we support our clients' continuous prosperity.

Our consultants all have extensive experience in development and manufacturing, as well as overseas experience. Our lead consultant has 10 years in electronic materials, 17 years in printed circuit boards, and 5 years of overseas business experience (working for a foreign company), bringing a wealth of experience and achievements in manufacturing environments that require the highest levels of production capability. By leveraging this on-site know-how, we will strongly support our clients in solving challenges related to new and existing businesses. 【Strengths】 ■ Possession of top-level on-site know-how in electronic materials, printed circuit boards, and component assembly ■ Logical problem-solving approach based on dual-wheel thinking ■ Appropriate solutions utilizing a high-quality information network *For more details, please download the PDF or contact us.

Company：KMT技研
Price：Other

Other services
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing BOM Solution (SMB)

Flexibly reflect new design information from design to manufacturing! Work aligned with actual business operations is possible.

We would like to introduce our "Manufacturing BOM Solution (SMB)." It features a structure that manages both EBOM and MBOM together (integrated management), allowing the manufacturing side to fully grasp changes made by the design side. Additionally, it adopts a data model that can manage MBOM alone, enabling the creation, revision management, and release of MBOM independently. 【Features】 ■ E→M conversion function ■ Manufacturing BOM editor ■ Manufacturing BOM approval workflow ■ System integration capabilities *For more details, please refer to the PDF document or feel free to contact us.

Company：クレスコ・デジタルテクノロジーズ本社
Price：Other

Production Management System
Purchasing Management System
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

WorkingVoice for Excel Voice Input

Easily input handwritten forms on-site using voice! Instantly convert existing forms to PDF!

Do you have any of these concerns? - There are piles of handwritten records on site. - It's difficult to input data from handwritten records into systems (like Excel). - Two people are working together for data recording: the measurer and the recorder. - There are many mistakes in handwriting and data entry, leading to low data reliability. WorkingVoice for Excel easily collects the overwhelming information at the work site through voice input and saves it in Excel forms. As a result, - Direct data input into the system can be done on site. - Mistakes in filling out and transcribing are eliminated, improving data accuracy. - New data collection leads to insights that were previously unavailable. - Hands-free operation and data entry become possible. - One person can perform the work and data recording that previously required two people. You can gain these benefits.

Company：テクノプロ　テクノプロ・IT社システムソリューション事業部
Price：100,000 yen-500,000 yen

Process Control System
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Voice Support System "WorkingVoice" <Presentation of explanatory materials>

Shall we promote the digitization of handwritten forms scattered on-site? It will contribute to reducing errors in entries.

"WorkingVoice" is a voice support system designed for field operations that can naturally convert spoken information into data. Since data entry in the work environment can be done via voice, there is no need to worry about transcription errors or mistakes in handwriting. It can also be utilized for the digitization of handwritten forms. Additionally, it allows for hands-free data entry while focusing on the primary tasks, contributing to improved work efficiency. 【Lineup】 ◎ "WorkingVoice for Excel" A voice support system that enables the digitization of handwritten forms scattered throughout the factory. ◎ "WorkingVoice for Factory" A packaged voice support system for voice-enabling field systems. ★ We are currently offering explanatory materials that introduce examples of how to utilize this system. You can view detailed information by clicking the download button below.

Company：テクノプロ　テクノプロ・IT社システムソリューション事業部
Price：Other

others
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Internal Inquiry Response Efficiency Solution

Would you like to reduce internal inquiry responses?

The biggest concern for the information systems department is "inquiry response." There are many inquiries, and for some, the day can end just dealing with them. Why doesn't the burden of responding to inquiries decrease? The main reasons are as follows: - Similar inquiries come in repeatedly. - Especially when responding to inquiries via email, it takes time to record/manage the response in a different tool. - Inquiries may come in that are not directed to the appropriate person, requiring time to find and forward them to the right contact. TechnoPro IT's "Internal Inquiry Response Efficiency Solution" addresses these issues in the following ways, significantly reducing the burden on staff. Efficiency improvements are possible not only in the information systems department but also in accounting, human resources, general affairs, and other departments. If you are struggling with internal inquiry responses, please consider this solution.

Company：テクノプロ　テクノプロ・IT社システムソリューション事業部
Price：Other

Other information systems
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No more handwriting needed! Smooth form filling with voice input solutions!

Even while measuring, you can input without any issues even with both hands occupied, dramatically improving the efficiency of the measurement work!

Are you facing any of these issues? - There are too many handwritten paper records at the site. - It's difficult to input data from handwritten paper records into systems (like Excel). - Two people are working together for data recording: a measurer and a recorder. - There are many mistakes in handwriting and data entry, leading to low data reliability. By using "WorkingVoice," you can input data into forms used at the work site using "voice." You can input data even while measuring or when both hands are occupied, significantly improving the efficiency of measurement tasks such as inspections. As a result, you can gain the following benefits: - Direct data input into the system at the site. - Elimination of writing and transcription errors, improving data accuracy. - New insights generated from fresh data collection. - Hands-free operation and data entry. - One person can perform the work and data recording that previously required two.

Company：テクノプロ　テクノプロ・IT社システムソリューション事業部
Price：Other

Process Control System
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Portable UV device 'SubZeroRS-170'

Highly effective at inactivating all surface biomolecules and microorganisms in areas with high public contamination risk!

The "SubZeroRS-170" is a handheld UV version of the flagship UV lamp system "SubZero Series," which has been continuously produced by Integration Technology for over 15 years. The extensive lighting improves the overall decontamination rate. The IST Group has launched new products related to UV technology as countermeasures against COVID-19, which has become a global concern. While we hope for an early resolution to the COVID-19 issue, we believe this can serve as a tool for permanent workplace environment improvement. Customers interested are encouraged to contact us. 【Features】 ■ Ultra-compact and ultra-lightweight ■ High power input of 1700W ■ High brightness reflection system ■ Mechanical shutter included (optional without shutter) * For more details, please refer to the PDF materials or feel free to contact us.

Company：K-SOLUTION 本社
Price：Other

Sterilizer
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Excimer UV Lab System

Surface cleaning and matte treatment support! From new material development to product prototyping and production.

The IST Excimer UV Lab System is a complete device that effectively promotes matte treatment evaluation using various substrates and inks. It can accommodate everything from the development of new products to prototyping and production. Excimer light sources are widely used for dry cleaning in LCD and semiconductor manufacturing processes, but there is growing attention on their use and application development as light sources for controlling the surface gloss of products, such as in house interiors, building materials, and automotive interiors and exteriors. With stable surface modification that does not cause surface damage using excimer lamps, it becomes possible to achieve quality standards for printed materials and special effect printing that were previously difficult to realize with various types of substrates. 【Features】 ■ User-friendly configuration for immediate use ■ Compact size allows installation in limited spaces ■ Full process with UV-LED for pre-curing, excimer for matte treatment, and UV lamp for final curing ■ Inert chamber configuration with stable low-oxygen environment (between excimer lamp and UV lamp) ■ Conveyor with cooling under-shield that excels in heat and chemical resistance (high-quality Teflon fiber) *For more details, please refer to the PDF document or feel free to contact us.

Company：K-SOLUTION 本社
Price：Other

Lamps and light emitting devices
Technology Consulting

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technology Consulting Product List and Ranking from 43 Manufacturers, Suppliers and Companies | IPROS GMS

Technology Consulting Manufacturer, Suppliers and Company Rankings

Technology Consulting Product ranking